Mermaid Top Review 5: Mertailor Silicone Scale Top

Top #5 Mertailor Silicone Scale Top

img_3329-1

Photo by Dan Compton

Custom made to match my Spellbound tail.

Price:

$159.00

Production Time:

  • Purchased with tail 9/7/2017
  • Almost ready/ teaser 10/28/17 (Mermaid Meet-up/tail delivery)
  • Picked up at during photoshoot with Mertailor 11/5/17

Customer Service:

I ordered a silicone scale top to match my Spellbound tail. I ordered it online at the same time my tail order was put it. Cup size and measurement under bust around rib cage was requested.

I received an email saying my tail was complete but the next day I was told that they were still working on my top. Candy was great and kept me updated on its progress. It was taking longer to cure than normal because the weather was changing.

Mertailor met me at a Florida Mermaid meet up at Ginnie Springs, FL to deliver my tail in person (which was amazingly nice of him). At that time he had my top but it was just a basic pink and hadn’t been painted yet. He offered it as is, but said if I swam in it he couldn’t paint it (Candy had emailed me this prior to the meet-up so I was already aware.) I told him I wanted it painted to match my tail. I gave him freedom of how to paint it but I wanted at least one star on it and not directly over the nipple area (😊).

Later that week, during a photoshoot with Mertailor I was able to pick up my freshly painted top.

img_4667

Photo by Mertailor

Quality/Durability:

This top is made out of thick durable silicone. The scales are well sculpted to match my rounded scales on my tail without looking like they came off a scale sheet. The silicone is attached to a Mertailor’s bikini top that has had the side bands removed. The silicone side bands are reinforced with power mesh and connected in the back with a swimsuit clasp.

The paint job matches my Spellbound tail. The color is slightly darker pink than my tail but this was done on purpose. Eric said he was worried about the top being too close to my skin tone and wanted it to stand out a bit. It has 2 gorgeous black stars (one on each side) and some stripes on the back. It is speckled and detailed exactly the same as my tail.

img_4695

I love how it matches and compliments my tail!

I’ve worn it in a pool, in the Florida Springs, on the beach and on a float at a dry event. It has gotten dirty, sandy, and sweaty. It has cleaned up fresh and new easily with a bit of soap and water.

As I was taking photos of the top I noticed that the power mesh near the clasp is pulling away from the silicone. It just needs a little silicone reinforcement. I’m finding that although silicone is a fun mermaid material, it does tear and pull away from itself with use. I’m getting more and more comfortable with small repairs like this.

img_6322

Oops.

Comfort/Fit:

The size is custom made to my measurements and it fits perfectly. This is my most comfortable silicone mermaid top. I am a bit concerned that there isn’t any way to adjust it if needed (as in: if I gain or loose weight). I haven’t had to worry about that yet and will cross that bridge later, if needed.

Since the cups are made with Mertailor’s bikini cups it does have a push-up quality that gives “The Girls” amazing cleavage. Eric did make a comment that some mermaids have been surprised at how enhancing the tops can be.

It is a strapless top but there are loops in the front that will allow for a halter strap to be added. The first time I swam with the top I didn’t have a strap and it flips down as I propel myself forward. Now I have a black, a nude, and a pearl halter strap to use with it. If I wear the halter strap, it keeps the top in place while I swim. If I’m not swimming the top fits fine strapless.

I may add permanent fishnet straps to both add a bit of extra coverage and to keep the top in place. It would be easy to do with a bit of silpoxy. But I also enjoy it being strapless so I’m still undecided.

Pros:

  • This is probably the best deal cost wise for a really well made quality Silicone Top on the market.
  • It gives me AMAZING cleavage
  • Nice paint job that matches my tail. I love the matching stars.
  • It fits me perfectly. It’s the exact measurement I gave for the top.

Cons:

  • Maybe too much push up & cleavage (maybe?)
  • It did not come with straps (there are hooks to attach a strap, though)
  • If I do not wear straps the top flips down while swimming
  • There is no way to make adjustments, if needed, around the rib cage

Lessons learned:

  • Silicone tops can sometimes be what makes the wait time for a tail seem endless. Tops are just as difficult to make and paint as silicone tails are.
  • I LOVE & highly recommend Mertailor’s silicone tops as well crafted & affordable. I want another one only with a black base.
  • I’m not sure if Mertailor is still making this smooth rounded Scale style top but he does have a new scale pattern top that looks just as nice.
  • Update: As of 5/11/2018 Mertailor discontinued this mold and no longer makes this style top. He has a new silicone version for sale on his website for $265 (with shipping & tax its around $300…I just ordered one. He must have realized he was under pricing them. I’ll do a review when I’ve had it for awhile.)

Advertisements

Mermaid Top Review 4: Sirenalia Silicone Starfish Top

Top #4 Sirenalia Silicone Starfish

Custom made to color request.

Base color: Gold.

Size: Medium.

Price:

$125.00 + $20 shipping = Total $145.00. Plus new bikini top $154.99

Production Time:

  • Purchased 4/20/17
  • Shipped 5/11/17
  • Delivered in Tampa, FL USA 5/15/17

Customer Service:

Initially I sent Sirenalia a FB message asking how to order a starfish top to match my tail & added a photo of the front part of my MerNation Silicone Tail. Then I found her Etsy Store. I placed my order on Etsy for the Silicone Starfish top on Etsy.

They advertised “any color.” I choose the base color as Gold and then wrote another note on Etsy to clarify the colors. I asked for a gold/light yellow & light pink (like ballet pink) to match my tail and let her know I sent a FB Message also. I also requested glitter.

In my note I also asked that the starfish be placed a bit closer together than her previous ones because it didn’t look like those would fit me quite right.

She messaged back a few days later on FB that she’d communicate with me on Etsy.

These are some of the Instagram posts Sirenalia made with my top:

Instagram post on May 4, 2017 of the silicone starfish with glitter

Instagram post on May 11, 2017 of just gold (I’m not sure if these are actually mine or just a similar color.)

Instagram post on June 16, 2017

Sirenalia sent me a note on Etsy the day they shipped in saying “Sorry it took so long….” and asked me to send pictures of me in the top. I guess they usually get them out a bit faster than 3-weeks. I thought it was a very easy process.

Quality/Durability:

It came with the silicone starfish attached to brown netting and a thin nude bralette. The silicone starfish have gorgeous realistic details and the paint job is beautiful. There is a light sparkle of glitter on them. The silicone is very thin around the edges and the entire starfish is soft and pliable.

The bralette is not my favorite. It is thin and seems like it stretches out of shape very easily. The straps are very narrow and dug into my shoulders.

The netting is nice. It seems sturdy and strong but I did have a some challenges keeping it tied at first.

Fit/Comfort:

The original top has a thin bralette with a brown fishnet under the silicone starfish. I ordered the Medium and even though it fit the starfish are a bit heavy for it and they pulled the fabric down in the front so I felt it made my boobs look saggy. I think I just needed a bit more support than the bralette offered.

This top would probably work better for small chested/small framed mermaids. I never really felt comfortable in it…as is. I also had a hard time keeping the fish netting tied (I even tried to safety pin it and put some extra stitches on it but nothing worked perfectly).

Finally, after having it for over 6 months and not feeling comfortable enough to wear it in public (I only wore it a few times in my pool & around my Fiancé), I realized I needed to revamp it so I could wear it. I mean…those little starfish are gorgeous and I wanted to show them off!

I had already successfully attached the Merthology Creations Silicone Shells to a bikini so I decided to do something similar with the Starfish.

Revamp:

I found another Bikini on Amazon that fit me well. (My Fiancé said the lace wasn’t very “mermaid-like” but it is covered by the netting and I really like it.)

Bikini purchased from Amazon: Xhileration $9.99

First, I cut the sutures that tied the netting down on the bralette. Then VERY carefully and gently peeled back the starfish from the bralette. The netting stayed attached to the silicone starfish. Some of it nicely and easily pulled away from the bralette but other parts I helped with a sharp scissors. Some of the starfish neat the edges are really thin so it was a slow process to make sure I didn’t damage it.

I kept the netting attached as is and used silicone adhesive to glue the starfish onto the bikini. Then I sewed down the netting to the bikini in a few places so it would hang correctly.

I recently wore it with my MerNation tail at Gilchrist Blue Springs (Central Florida). There were tons of families and kids everywhere. I received so many compliments on my top. Everyone loved it. It swam phenomenally and didn’t move. It’s definitely a top I’ll wear a lot more often now.

Pros:

  • Gorgeous paint job
  • A lot of details in the starfish
  • Nice paint job that matches my tail
  • Unique top that gets many compliments

Cons:

  • Not very supportive
  • I had to revamp it and attach it to my own bikini to make it useable
  • I feel it’s high priced for what I got out of it.

Lessons learned:

  • Not to expect a “one size fits all” to actually fit and look good on me.
  • That I can craft and use something I felt self conscious in and make it into the perfect top for me with a bit of confidence (it was scary taking the starfish off the bralette) and ingenuity.

Mermaid Top Review 3: Merthology Creations Silicone Seashell Top

Top #3 Merthology Creations Silicone Seashells

Custom made to color request. One size fits all.

Price:

$47.00 (+ $50 shipping UK to US, included with a 2nd top) /UK dollars £38 = Total plus bikini top $80.79 (plus shipping)

Production Time:

  • First message 5/20/17
  • Ordered & payment sent 6/12/17
  • Production started 7/9/17
  • Shipped from the U.K. 8/3/17
  • Arrived in Tampa, FL USA 8/7/17

Customer Service:

When I contacted Merthology Creations about commissioning a silicone top she had several options. One option was for silicone shells connected with netting embellished with seaweed and little silicone starfish. All of our communication was over Facebook Messenger. I asked her to match the color of blue on my little seahorse on my tail for the seashells with the edges in cream/gold.

She sent me this picture before shipping. She had also warned me that they were not very supportive which I understood when I purchased them.

Quality/Durability:

The silicone shells are very well made but the seaweed that was attached did not stay on very well. Upon arrival one piece had already fell off. When I tried it on she was correct in that there was ZERO support.

I decided I needed to give them support so I found a bikini on Amazon to attach them too. I removed the netting from the back of the shells. Then I tried to use E6000 to attach them to the bikini….sadly this was my first lesson in “silicone ONLY adheres to silicone.” I then purchased some silicone adhesive and used a ziplock bag filled with water to weigh the shells to the bikini while the silicone dried. Then I attached the little silicone starfish to one strap.

Bikini top purchased from Amazon: Kenneth Cole $33.79

I wore this top at one of the first mermaid meet ups I went to at Ginnie Springs, FL. It fit great but the seaweed kept rubbing on me and it was uncomfortable. A few more seaweed pieces fell off so I ended up just removing all of them. They were just attached with a little bit of clear silicone adhesive so they came off very easily. I find that I really like the simplicity of just the shells and tiny starfish.

img_2836

After I removed the seaweed and was trying out the Mertailor Fantasea Fin and Skin.

Fit/Comfort:

The shells alone are very uncomfortable with no cups to support “the girls” (which Sam told me about). The back of the shells are a nice smooth silicone that felt nice against my skin. However, the seaweed was irritating around my armpits.

Now that I have them attached to a bikini top that fits me and removed the seaweed, it is one of the most comfortable tops I own. It is great for laid back swimming and enjoying myself in my tail. I like having an option for a casual mermaid top that is still 100% mermaidy. It seems like it will hold up for a very long time. The shells haven’t lost any color or gotten any scratches. I love how it folds in half making it very easy to store and carry.

img_3280

This top works great for layering. I’m wearing the blue shells under this see-through top and it works great.

Pros:

  • Well made silicone shells
  • Nice paint job that matches my tail
  • Silicone is thick and very durable.
  • Very affordable

Cons:

  • Not supportive
  • Had to attach it to my own bikini
  • The seaweed was uncomfortable and did not stay attached

Lessons learned:

  • I took a risk and ordered a top from someone who didn’t sell through a website and it worked out really well.
  • I would defiantly order from Merthology Creations again. The price for what I received was spot on. If I bought this again I would just purchase the pieces…just the silicone shells and/or the small silicone starfish.
  • Shipping from UK To US can be expensive but for the right price of the goods it can be worthwhile.
  • That silicone only adheres to silicone so don’t use E6000 on it.
  • Even if something isn’t perfect for you at first there are many ways to make it work for you. Get creative!

.

Mermaid Top Review 2: Merthology Creations Seaweed Silicone Top

Top #2 Merthology Creations Seaweed Silicone Top

Custom made to size and color request.

Price:

$180.00 + $50 shipping UK to US, included with a 2nd top. (UK dollars £145) = Total $230

Production Time:

  • First message 5/20/17
  • Ordered & payment sent 6/12/17
  • Production started 7/9/17
  • Shipped from the U.K. 8/3/17
  • Arrived in Tampa, FL USA 8/7/17

Customer Service:

I saw some pictures of a top on Facebook that I really liked. I thought they would make a great addition to my top collection.

img_2939

Photo from Merthology Creations

img_2940

Photo from Merthology Creations.

I found Merthology Creations on Facebook and FB messaged her about prices and ideas. We FB messaged for a few days about 2 different styles she offered (I decided to get both). All our communication was done on FB messenger. I was worried about the European sizing compared to the US sizing and she calmed my fears by telling me she coverts it for the proper fit.

She kept me in the loop about everything. She double checked what colors I wanted and sent pictures of both tops before they were shipped. It was one of the best custom ordering processes I’ve had.

https://www.facebook.com/merthologycreations/

Quality/Durability:

It is built onto an underwire bra base. It looks like she uses pieces of silicone seaweed to build the top. The cups are molded using the bra but she cuts the edges of the bra down to make it look perfect with the silicone. The painting has several shades of green giving it nice dimension. My favorite is the two pearls above the pink/cream silicone seashell. I think it gives the top a final bit of

It it a robust top that hold its shape really well. The halter strap attaches with Velcro and over time this may be the first thing to wear.

Fit/Comfort:

This top is full coverage and VERY comfortable. I love wearing it. The sides are very wide and cover extra “side boob.” The bra is lightly padded but does not have any “push up” padding. It is a supportive top.

The halter strap is also wide and connects with Velcro. This has made for wonderful land/dry gigs because I can adjust the strap for my comfort. I tend to get neck pain with a lot of halter strap tops or swimsuits. It was also OK for the few times I was swimming/floating around my little pool. But as soon as I took it in bigger open water and really swam around in it, the Velcro did NOT hold. Suddenly I was holding to top up with one hand and treading water with the other….I think the can be easily fixed by sewing a hook to the halter.

img_2874

First swim.

img_2875

Reaching to hold the straps after the Velcro came undone.

These photos show one of my first long underwater swims with the top. The first is me swimming and the next is me reaching up to hold the top together after the Velcro came undone. LOL.

Pros:

  • Extremely comfortable
  • Has great support and good coverage
  • Silicone is thick and very durable.
  • The straps on the side do an awesome job covering any extra “side boob” *this is probably my favorite thing about this top.
  • The top is unique and I don’t find a lot of other US mermaids with a similar top

Cons:

  • Velcro on the halter comes undone when swimming. (I have very large shoulder muscles). I need to figure out how to attach a good hook to the halter.

Lessons learned:

  • I took a risk and ordered a top from someone who didn’t sell through a website and it worked out really well. But I was prepared for it to have not worked out & me being out the money. (I had a really good feeling about Merthology Creations & I just went with it.)
  • Shipping from UK To US can be expensive but for the right price of the goods it can be worthwhile.

.

Mermaid Top Review Series: MerNation Silicone Scale top

 

For those of you who follow my blog for the aerial equipment info…I’m taking a bit of a side track and highjacking my blog for my Mermaid fans. I’ve developed a bit of a Mermaid Top collection (it’s really an obsession, at this point). I have tops from several big Mermaid brands (& some from lesser known designers). They range quite a bit in price and quality. In my reviews I’ll give insight into some of things I wish I knew before I purchased them.

Top #1 MerNation Silicone Scale Top

Custom made to match my full silicone MerNation mermaid tail.

This was my first silicone mermaid top. It was purchased from MerNation at the time I ordered a full silicone mermaid tail (2017). It has a an “add on” feature of a light gold decorative filigree on the top and on the straps. It also has a glitter top coat.

Price:

Starts at $275 (pricing as of Mar 2018). I actually can’t remember what I paid for this top as it was included in my total Tail price.

(I also ordered a silicone waist/gap wrap…which was the BEST mermaid purchase I’ve made so far. Ask me why & maybe I’ll do a review on it too.)

Production Time:

  • First meeting/placed order 3/6/17
  • Paid 3/11/17
  • Update from MerNation with photo of painting 4/3/17
  • Complete & picked it up 4/6/17

Customer Service:

When I was at MerNation’s business to get measured for my tail, Erin gave me several plain bra tops to try on. I believe they were a few different brands (I know one was a Victoria’s Secret). I vaguely remember picking one but saying I needed at 36 (not a 34) for the chest size. I can’t remember if this was written down or not.

MerNation kept me posted every part of the way with text messages and pictures. This is a photo Erin sent to show where they were at after they finished painting but before they attached the filigree.

Quality/Durability:

The top is built with a plain bra top as the base. The silicone is thick and sturdy. The scales match my silicone tail exactly. They are about the same thickness as my tail. The filigree is thick and attached very strong.

The one place that may eventually have issues are the straps. They are more stretchy than the rest of the top therefore may wear out faster. So far I have had no quality issues with them at the one year mark.

I like this top mostly for my more “professional” gigs as it’s one of my more expensive tops. I want to keep it in the best shape possible. I’ve wore it for several underwater photoshoots but just once at a pool party and once at a Mermaid Florida Springs meet up.

 

Fit/Comfort:

I’m usually a 36/38 B. The cup shape is amazing and it gives me a perfect amount of cleavage without the risk of “spilling out.” It is slightly padded & a bit of a push-up. I feel like it gives me adequate coverage for it to be one of my more conservative tops. I’m very comfortable doing underwater acrobatics with it without being afraid of inadvertently flashing anyone.

It is VERY tight on me & it takes a few minutes for me to put it on without help. (Silicone sticks so clasping it in the front and sliding it around the body can be a humorous dilemma.) I did purchase a bra extender to make it fit better and now (although still tight) is just snug and not constricting. I still don’t want to wear this top for long periods of time because it doesn’t fit me just right. (Maybe if I loose some weight it will fit better…actually I’m sure it would…)

When my hair has been down, it has gotten tangled in the straps . It made for some awkward underwater modeling experiences. The photographer said he couldn’t tell but for me it felt really weird. I ended up taking the straps off to finish the shoot. Then in more recent events wearing the top, I’ve pulled my hair back and not had any issues.

First time wearing it and couldn’t get it hooked correctly because it was too tight.

Pros:

  • Matches my MerNation tail perfectly
  • Colors are amazing
  • Superb, unique artistic workmanship
  • High quality, thick silicone
  • Very professional looking

Cons:

  • It’s too tight. I had to put a bra extender on it. It can get uncomfortable (because it’s tight) after wearing it for a long time.
  • Long hair sometimes gets tangled and stuck to the silicone filigree on the straps.
  • The flaps in the back look sort of odd. I’d like to figure out how to tack them down in place.

Lessons learned:

Silicone once attached to a bra does not have much stretch. If you are a 36B and wear the bra on the last hook and it’s at its maximum stretch….the silicone top will be VERY tight.

Bra extensions are your best friend. They are cheap (you can get them off Amazon). They come in several colors and can give added inches in comfortability.

* The last 4 photos are of the top after I have had it for over a year.

Trial 3 DIY Aerial Costumes: Tie Dye

I’ve figured out that I am a lot better at tie dye than painting. Especially if you have the right tie dye products.

In the past few years I knew I wanted to create more costumes either by painting/embellishing/dyeing,  I bought some white cotton leotards, biketards, and dance shorts from Aliexpress. They were made in China and took over 40 days to be made and arrive. I bought 5 of each and the price added up but they were all under $12-14 each.

NOTE: That when buying from China sizes run VERY small and the arm straps are NOT made for aerialists. Be prepared to make alterations.

I was at CVS and saw a tie-dye kit on sale for about $5. The colors were bright and it had everything included: dye, bottles, rubber bands, instructions and gloves. Tulip One-Step Tie Dye Kits
iphone - 15

I have a new little nephew who lives half a country away. I wanted to make him something personalized from me. I went to Target and bought a 5-pack of white onesies to include in my tie-dye session.

I ended up tie-dyeing 9 items at once. This made things so much easier. It took about 1.5-2 hours to do the actual tie-dyeing. Then I left them to set overnight and rinsed and washed them the next morning (this took about an hour to do).

  • x4 baby onesies
  • x1 large leotard
  • x1 biketard
  • x1 leotard and x1 dance shorts (matching)
  • x1 old tank top (as a tester)
    iphone - 6

I did a Pinterest search on different ways to tie-dye. I used a few different methods.

Wet or Dry Method:

I tried both the wet and dry method. Having the fabric wet/damp (I ran them through a quick wash/spin in the washing machine) made applying the dye a lot easier and less messy. The wet fabric soaked up the dye easier and had a more saturated look. The dry fabric the dye would bead up and went everywhere. I had to be slower and wait for the dye to soak into the fabric. The final results with the dry fabric had a lot more white area. The first baby onesie was done dry and the last one was done wet.

This link show several different tie-dye methods.

Spiral Method:

This one is my favorite. I grabbed the fabric in the center and spun it around in a circle and put rubber bands around the entire thing. It makes 6 triangle/pie pieces that you soak with dye. (I later learned that you can use a fork to spin the fabric around…like spaghetti. This might make this easier. I’ll try it next time.) I did the first and last baby onesies with the spiral method.

Heart Method:

I wasn’t as successful at this one. BOO! This was harder than I thought. I also used a permanent marker to draw a heart on the fabric. Next time I probably won’t use permanent marker…Now I on the leotard that has the heart on it I’m going to need to either paint or do something else with it because I don’t really like the random heart… The second baby onesie was done with the heart method. It worked out a bit better than the leotard.

Bulls Eye Method:

This is a tried and true method. It leaves a big circle bulls eye on the fabric.

Stripes Method:

There are so many options on this one. You can use one or many different colors. I love it! I did the third baby onesie with this method.

Wrap up

I think tie-dye is a great inexpensive idea for aerial costumes. Especially for a less formal event.

I’m visualizing an aerial/circus tribe at a festival with everyone having different but cohesive tie-dye costumes. Either in same colors but different methods or different colors but same methods, etc.

Or for a studio Open House or Student Recital that the performers want matching custom costumes but don’t want to spend $$$ on a custom costume.

Or for an aerialist who just wants to jazz up their practice leos… (which is what I’m probably going to use these for)
iphone - 14

 

 

 

Trial 2 DIY Aerial Costumes: Fabric Paint and Rhinestones

This is my second attempt at making an aerial costume. I had a white cotton unitard with wide legs (not tight like I would want for aerial routines) that had been laying around for a few years because it was an “On SALE” mis-order that I couldn’t return. I finally decided to give fabric painting a try.

  1. I started the by sketching a pattern of what I wanted my swirls to look like then I colored them in.
  2. I put the unitard on my inflatable mannequin (bought off ebay $25) and took a pencil and drew outlines of the shapes.
    iphone - 42
  3. I put Jacquard Water Based Resist in a Jacquard 1/2 ounce squeeze bottles with stainless steel tips (see below for list of supplies) and outlined my design.
    iphone - 45
  4. I used Jacquard Dye-Na-Flow to fill in the design. I put the paint (which looks and feels like fabric dye) in the small 1/2 oz squeeze bottles. I used a very small amount on a paint brush and applied it to the fabric.
    iphone - 64
    iphone - 62
    It spreads very quickly and you need to be very careful that it stays in the lines.
    iphone - 66
    NOTE: I should have made my water resist lines thicker because the paint (dye) bled out quite a bit.
  5. I had to “fix” all these areas where the paint bled through. I took white textile paint and touched up the design. You can sort of see the paint but from a distance it looks OK.
    iphone - 93
  6. Next, I took Jacquard Textile paint and outlined the design and made some high and low-lights around it.
  7. Then I ironed to set the paint into the fabric.
    iphone - 106
  8. Time for some rhinestones. I separated them by color and size.
    iphone - 90
    Then I planned out the order that I wanted to attach them and put them into lines.
    iphone - 105
  9. Attaching rhinestones is very easy. I watched a few You Tube videos on How to Embellish Dance Costumes. I used E600 and a Jewel Setter (a stick with a bit of wax at the tip. You can get them at Michaels or a craftstore and they help A TON!).
    iphone - 108

    Finished product:

I like it. It isn’t professional and I wouldn’t use it for a paid performance but it was a great learning experience. I now know how these paints work on stretchy fabric. I learned about water based resist, dye-na-flow, and other design aspects. It still needs some work but …I like it.

iphone - 110

 

Supplies I’ve acquired during the past few years.

Fabric paint:

Some I had purchased in 2014. I’m not sure how much I paid for it. The new paint I’ll put purchase prices for reference. Fabric paint isn’t cheap unless you know the exact colors you want. Otherwise it all adds up pretty fast.

Jacquard Textile: For Natural Or Synthetic Fabrics

  • 122 Black. Very thick paint. Used about 6 months ago to paint over the logo on my bouldering crash pad. It covered the bright orange in two coats.
  • 123 White
  • 111Sky Blue
  • 114 Turquoise
  • 155 Fluorescent Blue
  • 151 Fluorescent Yellow: very light, could not be seen very well on white fabric.
  • 153 Fluorescent Pink. (2.25 oz.) Amazon $7.96
  • 156 Fluorescent Green. (2.25 oz.) Amazon $5.72

2016-03-27 09.59.03

Jacquard Lumiere: Light Body Metallic Acrylic

  • 561 Metallic Gold: 2 bottles purchased about 10 years ago for a Wonder Woman costume. One bottle opened and 2/3 empty. The paint was very thick but it still worked fine.
  • 567 Super Sparkle
  • JAC9901 Halo & Jewel Colors Lumiere Exciter Pack, 9 Color (0.5 oz. bottles): Halo Pink Gold; Halo Blue Gold; Halo Violet Gold; Pearlescent Turquoise; Pearlescent Green; Pearlescent Magenta; Russet; Pewter; Sunset Gold. Amazon $9.99

2016-03-27 09.59.16

Jacquard Dye-Na-Flow: Free Flowing Liquid Color For Natural or Synthetic Fabrics

  • 830 White
  • 801 Sun Yellow
  • 824 Azure Blue
  • JAC9908 Dye-Na-Flow Exciter 9-Colors (0.5 oz. bottles): Chartreuse; Turquoise; Periwinkle; Violet; Magenta; Scarlet; Bright Orange; Golden Yellow; Sun Yellow. Amazon $11.65

2016-03-27 09.59.33

Jacquard Water Based Resist

2016-03-27 10.00.06

Other stuff

Tulip Glitter Spray Fabric Paint – 40 oz. Michael’s $7.49 (on sale $5.99) *Looked great when I tried it. It was a sheer glitter but I’ve been told that it doesn’t hold up well when washed.  It was easy to do so maybe this is for that costume that you wear once and then have time to re-spray after washing for the next use.

Tulip Glow in the Dark Spray Fabric Paint – 40 oz Michael’s clearance $2.99

Jewel Spinner with Rhinestones – Michael’s $2.99 (on sale $2.40)

Tools:

  • Cardboard
  • Water bowl
  • Paint brushes- assorted
  • Foam brush
  • Pencil
  • Scissors – Michael’s Bent 365 $12.99 40% off = $7.79 (to be fabric only scissors)
  • Jacquard 1/2 ounce squeeze bottles with stainless steel tips
  • Bead pick (plastic stick with wax on tip to place rhinestones) – Michael’s $4.99 for 3 (on sale $3.99)
  • Stencils
  • Paint pallet with cover -Michael’s $1.59
  • Mannequin – Inflatable Female EBay

2016-03-27 10.01.15